top of page

Home / Products / Stainless Steel Fittings / Check Valve Male x Male - SS 316 Instrumentation Valves

Check Valve Male x Male - SS 316 Instrumentation Valves

SKU ID: CVM

Description

Check Valve Male x Male - SS 316 Instrumentation Valves

The CVM is a check valve male x male that isolates or controls flow in the line, with a body built for repeated operation. The 316 stainless steel body resists corrosion in gas, hydraulic and pneumatic service. Dimensionally interchangeable with equivalent Parker, Swagelok fittings.

Sizes and Part Numbers

Sr. No.

Size

Ref Part No.

1

1/8 Inch

CVM-2

2

1/4 Inch

CVM-4

3

3/8 Inch

CVM-6

4

1/2 Inch

CVM-8

5

3/4 Inch

CVM-12

6

1 Inch

CVM-16


Technical Specifications

Size

1/8 Inch to 1 Inch

End Connection

Male and Female NPT, BSPT, SAE, OD Tube

Working Pressure

SS 316 6000 Psi (413 Bar) · Brass 3000 Psi (207 Bar)

Temperature Rating

PTFE 450°F (232°C) · Neoprene 250°F (121°C) · Buna-N 275°F (135°C) · Ethylene propylene rubber 275°F (135°C)

Orifice

2.0 mm Dia to 16.7 mm Dia

Material of Construction

SS 316, Brass

Sour Gas Service

Optional, conforming to NACE Std. MR-01-75


Features

  • Resilient, blow-out resistant and leak-tight shut-off seat design

  • Back stopped poppet prevents the spring from being overstressed

  • 100% factory tested for both crack and reseal

  • Cracking pressures of 1/3, 1, 5, 10, 25, 50, 75 and 100 Psig

  • Back pressure may be required to reseal the valve at a nominal cracking pressure of 5 Psig or lower

  • Heat code traceability


Label Colour Reference

  • Blue: PTFE

  • Green: Neoprene

  • Black: Ethylene propylene rubber

  • Brown: Buna-N


Lubrication

Dye molly sulphide lubricant is used on the outer body in SS 316 and brass. A silicon based lubricant is used on the poppet.


Application

Male x male check valve that screws directly between two threaded ports, preventing back flow into a pump, regulator or sampling line.


bottom of page